134: HYDRAULIC FARM SHOP DOORS

1

Wanting to get an idea on price for a hydraulic door for a new shop we are looking at building. Have looked at your doors for years at the farm show in Louisville. At this point looking for 1 door. Would like to price a 40' door and a 60' door, 20' Tall. Barn metal exterior with maybe 4 widows for light and vision outside. It will probably be on an end wall of a wood construction building with a 4' tall concrete wall, so 16' of wood. Let me know if you have any other questions. Thanks

2

Looking at building a farm shop with Graber Post Buildings out of Montgomery, IN. I'd like to price an 18'x30' Hydraulic door for it. There's a door in one of your model pics I'd like to imitate.

3

I am currently working on an electrical design for FBI Buildings in Remington Indiana. They are installing two 50' x 20' Hydraulic doors. I was hoping that someone could share the electrical requirements that these doors take to run? Thank You,

4

the hydraulic door on this OK farm shop would have to clear the opening height so there is no head room loss. the door is offset of the shop also it will require four windows across and a walk door. I'm just wondering if this would be possible with your doors and also if i could get an approximate price. Thanks, Chad

5

Yes , I need a quote for (1) 60' x 15' Hydraulic agricultural use door  Ship to: Dekalb County, Ga 30083

6

The opening is 36' by 10'. The farm and shop building in MT is a Hansen pole building 40' x 40'. The siding is metal. Will only consider a Schweiss hydraulic door.

7

I may be interested in this option as a hydraulic door solution for my IA farm shop building. What information do you need to design me a one piece hydraulic door? Thanks

8

I have a one year old Cleary farm building with a 36' opening (two 18' sliding doors). My shop is insulated, as well as the doors, but the present doors are too light and do a terrible job of sealing. I'm ready to look for something different. Would your hydraulic doors install on a Cleary building? The door opening is 19' in height and 36' in width. Can you give me a rough estimate of what one of your bifold doors (with straps) would cost? I've seen your doors up close and they are very well made .

9

Need a Schweiss custom-made machine shed door - rough opening of 14.5' high, 26' wide. What would you suggest, Bifold or Hydraulic? This is going in a shed already constructed and will replace the rolling doors now on this farm shed.

10

Could you please provide me with a quote for a single one piece hydraulic Red Power farm shop door for a opening size of 28\' wide and 15\' high. Please include all necessary materials for installation and include freight. If you have any questions please call or drop a line.

11

Hello I am looking for some more information on your Hydraulic Red Power door. We have a 26 by 16 door now with a steel header. Just kinda wondering where a rough ball park figure would be for a this door. What do you supply? What would we supply? Do you have condensation problems with these doors in a heated farm shop? Do you install the doors? Is there a remote option? Any information you can give me would be great. Thanks

12

Good morning, Do you have service to the East? I have a prospect looking for approx.. a 38' x 16' Red Power Hy-dro door for a proposed farm shop. Any info. You can provide me would be great.

13

I AM CONSIDERING PUTTING A SCHWEISS BIFOLD OR HYDRAULIC DOOR IN THE END OF MY FARM SHOP, I WAS WONDERING HOW FAST THE DOOR GOES UP, AND WHAT LOCKS THE DOOR UP FOR SAFETY.

14

Would like quote on a hydraulic door, 40' x 16'. Quote installed price. Let me know headroom clearance needed. Door will be installed in endwall. Project name: Smith Farm Shop

15

Looking for a hydraulic door. this door will be going in a end wall and the opening will be 40x18 it will be used to house farm equipment and trucks

16

Interested in the price of an insulated 30' x 16' Hyd. door for a farm shop. Don't know if their side columns are tubes or I-beams. Thanks.

17

need door specs for a hydraulic door 30 ft or 35 ft wide and 16 ft high opening for a farm equipment building. The building will be a wood pole type structure with metal sheeting on roof and walls.

18

Considering a hydraulic door for a farm shop that is in the future of our operation. We have an old bifold that was installed 30 years ago (not yours). Predicting a 50w x 20h opening. Would like a estimate (current price) for planning purposes. Thanks in advance. Jack S.

19

Regarding two big bifold shop doors for my farm shop. Please email me more info on your pricing an constuction of your doors. my doors are about 18 ft by 18 ft each . want to run hydraulic

20

Are still in planning stages on farm shop building/hanger. Will build 100'x100'x16' or 18' high ceilings to get a full 16' ceiling with door up. Will have a 50'x16'-18' door on each end of building. Will decide on Hydraulic or bi-fold, depending on price and best door for our needs. Leaning toward hydraulic if no leaks and mess. Maybe hydraulic on one end and bifold on other.

21

I have a customer that wants the biggest hydro powered door possible. He owns a farm equipment company and the opening size will be 40'x15'. He will build it to the specs I provide him. I need to get something to him asap. Thanks

22

19'9" x14' Schweiss one peice hydraulic door, Attaches to Steel jamb farm Equipment shed, Let me know what additional information you need to quote. Thanks

23

I am building a big 70'X120' farm shop I would like to put a 40' or 50'X 16' door on each end. I am unsure of bifold of hydraulic, my first hunch was hydraulic but we have windy springs when it will be in use the most.

24

would like a price on a 30 x 16.6 hydro door. 2 windows. this will be new construction for a farm shop to be insulated and tin on inside.I need more information on all the safety devices you have.

25

Dear Schweiss Mng, I am looking for two hydraulic doors the sizes are 13 by 24 and 14 by 30. I farm and also do constuction work. Iwould like information on these doors and price quotes as soon as possible. thank you.

26

Hi i was wondering if i could get a quote on some hydraulic doors, we are building a 80 by 200 shop on the farm and we want a door on each end on the one end we want 45 by 18 on the one end and on the other end we want one at 35 by 18 if you could get back to us please and would you guys be abale to install them thanks

27

I would like a quote for the frame and hydraulic system for a door 18' wide and 12' high for an ag shop. I would like to use my own panels on the frame if possible. Thanks.

28

Just looking for a quote on a couple Schweiss hydro-powered doors, sizes. 42x18 25x18 16x16 I am wanting to put doors on an insulated steel farm shop. any questions please email any time. Thanks

29

looking for a price for a 20 ft tall 50 ft wide hydraulic door. it will be installed on a farm shop and I am expecting delivery in utah around the middle of April.

30

I NEED A QUOTE ON 40'X16' FARM SHOP HYDRAULIC DOOR DELIVERED

31

Hello I need a couple of options for a farm shop I am working on: 1) 36-0 x 18-0 Hydro Swing Door VS. 2) 36-0 x 18-0 Bifold Door You can either e-mail or fax the bid, any questions give me a call.

32

I'M building a hanger on my farm and neer a hydraulic door. looking to save money where it is practical.

33

Hello I am putting up a 210 x 86' unheated industrial building on my farm. The building consists of 7 thirty foot sections. I will likely need 3 hydraulic doors with space of 20 x 30' between the heavy I - beams. Please advise on options suggested and include delivery and installation costs. Thanks

34

look for the cheepest hydraulic door you got its for a are farm building wondering if i can get a quote

35

Hi, I have a 60X40 foot steel bldg on my Farm in West Plains Mo, and looking to put a hydraulic door in the 40 foot end, for my Grummen AA5 aircraft. Have a 10 foot clearance, and the 40 foot is the nonweight bearing end of the bldg. What would be the timing, costs, and shipping of a 34 X 10 foot door? Are there complications with installation?

36

This hydraulic door is for visual appeal to the front of our new dairy parlour barn. Looking for natural light in winter and ventilation in summer.

37

I need a hydraulic door to cover a opening 42' wide x 10' high. It will be installed on the gable end of a 64' wide building. The right verticle edge will be approx. 9' in from the right corner of the building. The left side will be approx. 13' from the left corner. So, this door can be raised above the 10' opening by hinging the top above the 10' high opening on the surface of the gable end. the roof is a 3/12 pitch so the point will be approx. 8' high. 9' in from the right side should be about 27" above the 10' high opening. I am sure this will be plenty of space above the opening.  Level of diffaculty for us to install? Do you provide installation on site at additional cost? What is approx cost to install by you if provided? What are the panels covered with on the outside? Are these tight for weather and critters? Other questions I have not asked? Looking forward to a quick reply as this is a big part of the new building I am planning on my farm. thanks

38

Im putting togather prices on a farm shop I'm going to build, on the end I need a 30'  hydraulic door, this barn will have 14' side walls, would like as big as opening as possible, thanks

39

need to install 2 hydraulic doors one is 13'2" tall x 24 ft wide insulated the other 40 ft wide x18ft high non insulated for my farm shop give me some prices and options