110: ALUMINUM HYDRAULIC DOORS

1

Am I able to get a quote for a one piece aluminum door with hydraulic acuation to open at just under a 90 degree angle for runoff? I would like to have aluminum framing with 20ga aluminum sheet riveted on the exterior. Thank you for your time.

2

Looking for two doors for my beach house for lower level garage- I think the hydraulic would be easier than the bifolding doors. Was wondering if you make aluminum doors- I am on the beach and would highly prefer aluminum. Please get me information and pricing on building these.

3

Need an hydraulic aluminum door with all glass panels. All black framing if possible. I will have an 8' x 18' opening in a 10' height wall. I need as much as possible sticking outward and to end up with as much opening height as possible. This is for a new residential detached garage. Does Schweiss do aluminum doors with glass?

4

Hello, I spoke with a representative regarding use of Schweiss doors on a project we're working on in Austin, TX. We have eight openings, 12' high by 20' wide that we may use hydraulic doors on. We'd want the doors to have glazing, preferably any metal framing could be painted to match the anodized aluminum of our facade curtain wall, and we'd like the ability to remotely locate any hydraulic pump equipment, either in an accessible pit below the door or in a remote room. I was hoping for some additional information regarding third party sources Schweiss has worked with for glazed curtain wall doors and a more comprehensive cost estimate per door, including framing, mechanical elements, cost per LF of hosing if a remote location for the hydraulic pump is used, glazing prices, installation, shipping, and additional costs. Thank you in advance for your response.

5

Hi, I work with a garage door company, I need a price for 4 or 3 hydraulic doors 8'x7' aluminum black with thermos windows Thanks.

6

Looking for a quote for two - 8' x 8' 3-panel wide full glass hydraulic doors with an anodized aluminum frame.

7

I have two residential garage doors that I would like to install aluminum hydraulic doors on. Both are 102" tall one is 264" wide the other 120" wide.

8

Looking for a quote on the build your own hydraulic door kit, does the kit come in aluminum too? We want to do 60' x 20'. We are in British Columbia, Canada.

9

Preparing to build a pool house for a client and she wants a weather tight glass hydraulic door with the red power pumps and an aluminum frame, 8 ft. wide x 7 ft. tall.

10

I personally have one of your hydraulic doors ...two over the years...am secretary for our airpark...influenced a friend to buy a bifold door for his new home here... We just experienced hurricane damage here and another owner probably is in need of a new door, he is looking for an aluminum frame hydraulic door.  Thank you

11

Interested in an aluminum hydraulic door retrofitted into the sidewall of an older garage. 98" x 20 ft. I want a walk door and glass windows on the top half.

12

I am interested in a aluminum garage door for an RV garage. Bi-fold or hydraulic. Looking to purchase for a new build and I would like to know an approximate price range.

13

We have a project that is in its early design phase and we are proposing to use your large glass Bifold operable doors with an aluminum frame that can be opened up in the summer months when the temperature is comfortable. The project location is in a place that receives a lot of snow fall in the winter months and also get high winds year round. I would like to get a cost estimate for a Bifold door 57'wide x 40'high. Please send me specs for the door and specify what is not included in the cost (delivery, installation, etc.) Thank you. I hope to hear from you soon. Sincerely, Melanie

14

Considering buying a farm that has a 30x40 pole building. The 30 ft end has a sliding door that opens halfway with a post at the 15' point Is it possible to install a header and an aluminum hydraulic door? What would be involved? What about a header and a bigger door on the 40' side? Thanks

15

My garage door is a proxy 18 x 7 opening in Concrete filled block and stucco structure. I am interested in a single top hinged, hydraulic lift door made of aluminum which will serve as a protected canopy when open and a 150mph or better storm door when closed. I would prefer to install my self, but will consider all solutions. Please advise product availability and costs. Thanks, Wallace

16

Hi, Looking for a solution to replace our loading dock barn doors with a hydraulic door, preferably one made from aluminum, but have I only 5 inches of headroom to the roof. What is r-rating. Needs to be winterized.

17

I'm an overhead door tech in northern British Columbia, Canada. I have a customer in need of a aluminum hydraulic door for his garage. He will need a 22' by 9' door with insulation.

18

Nice products. we are interested in hydraulic and bi fold systems with aluminum frame glass panels. or any also please call or send mail us. any dealer in india??

19

Planning on building a shop that will also double as a hangar for my small plane. I need a hydraulic door that is 31 feet wide and 9 feet high, I would like the door made of aluminum. Wood construction on the frame and concrete slab. Shop exterior walls are planned at 10 foot exterior walls. Looking for the most economical way to make this work!

20

I am quoting a project at an Airport in North Carolina. They spec a one piece flush mounted hydraulic aluminum door - 70' x 22' clear opening min. Thank you, Clarence

21

looking for a price and more info on the BYOD kits. I am building a new machine shed/shop. i would like to install a 30x16 aluminum hydraulic door and a 24x16 aluminum hydraulic door. Could you give me a quote on both doors installed. and what the build your own door kits would cost for me to do it myself. THANKS

22

I would like to get some pricing for the hydraulic doors with aluminum frams I will soon be doing some restaurant remodeling and would like to see if your doors would fit my needs. I want the doors to be weathertight and insulated.

23

Hello, I am curious in learning more about your product as well as do you work with people in New York? I am looking to implement this style window in a seasonal restaurant outside of Buffalo, NY along Lake Erie. Can you please get back to me with details in a potential relationship and or others that are able to supply an aluminum hydraulic window in the northeast.

24

I am part of a real estate design and architecture firm that specializes in industrial style renovations to residential properties including containers. We've installed 25 to 30 custom garage doors in living rooms, bedrooms, and kitchens this year. I have a customer that is looking for an aluminum hydraulic door to open up his back patio. Please call for details.

25

We live in Alaska and are building a hangar for a 185 and a 182. Please get me a quote for 44 foot wide hydraulic door made from aluminum at an appropriate height for the above aircraft. Also, what is the typical shipping to Alaska? I don't yet know if the building will be wood or steel.

26

Hi there! I am working on a project where we would like to install multiple aluminum hydraulic doors and I am in need of a conceptual model to work into our drawings. It would be something similar to the bi-fold doors that you completed at the Federales restaurant in Chicago. Is this something that you have and can send me? Thanks! Ronny

27

I am about to build a hangar at my home on an Airpark. I will need a 54' wide and 16' tall door. I would prefer a one piece aluminum hydraulic hangar door but would like to price it and a bi fold. Thank you, Ray

28

Can you give me a quote on 6 - 40' wide x 10' high aluminum hydraulic doors with the red power pumps for a hangar (pre-engineered building) in Debert, Nova Scotia, Canada Thanks, Timothy

29

We want to do an all glass, aluminum frame, hydraulic door for a restaurant. Opening is 18' high x 21' wide. The caveat is that the door must be able to have an operable entrance when closed, meaning that the lower portion of the door needs to have a single walk door in it, which would be accessible when the bi-folding door is closed. Is this possible? The single door would need to be lockable, so that when the bi-folding door is open the single door does dangle, it folds up with the door.

30

Looking for garage door for residence. New construction. 16' wide x 18' high. One piece hydraulic garage door, all glass with an aluminum frame.

31

Price and availability for aircraft hangar door for pole barn. 45' truss 16' wall height. 42' by 12' opening required. Also what supporting structure would be required ( double truss and posts) ?

32

My building is planned to be 90' long 50' wide my question is side wall height. It appears each door has a different stacking with when open fully 12,24,36in. So I'm not sure what the minimum width and roof pitch I can get away with. I need a 40wide 14 tall opening aluminum hydraulic door with the red power pumps. Also if I need to pass along any special support needs to the building manufacture before they construct end wall design to save me $$$ upfront. Lastly what would this door cost me two quotes please one insulates foam board and one uninsulated. Just seen truss type below I'm not sure which this is go to adamstruss.com gentry ar it's a strait leg steel not really rolled steel or I beam as listed below as options Thank you Avery.

33

Need a price on a aluminum hydraulic door for a commercial fab shop in Seminole, TX. Whatever frame work that is necessary will be done by us. It will be a non insulated door. The opening will need to be 50' wide and the opening height needs to be a minimum of 28'

34

Looking for a estimate on 2 aluminum hydraulic hangar doors each 60' x 20' Clear height doors for a hanger project that we are working on. Please call with any questions. Thanks! Michael

35

I am looking into two sizes of doors for a project shop I am looking at. I wanted to get a quote for a 50' x 16' and 70' x 18'. Seems like very large doors but I have some very large ideas (custom truck shop). You have some very impressive doors and I looked into some other kinds but I want the ability to have crane rails on the inside and yours seem like the only way to go. I think the one-piece hydraulic door with an aluminum frame and red power pumps will be best for this projecct. Thank you!

36

Can you give me a budget number for an hydraulic aircraft hangar door, 24 ft. tall by 55 ft. wide? I talked to a building company and they gave me your name to contact as they don't carry that size. We are in Owyhee NV 89832. I'd like to have a package price including installation to use in the budget, then when we find the funding, we'll get back to you. I would like the door to be insulated and have an aluminum frame.  Thank you. Steve

37

I am working with a customer on a hangar project. The customer would like to use a 48x15 aluminum hydraulic door to go into a rigid frame building I am designing for them to use your door with. The building will be going to Wawarsing, NY 12489. The ground Snow Load is 50 PSF and the wind load is 115 mph. Could you please provide me door specs for this door to design the building. Please email or call if you have any questions. Thank you, Jack

38

I am looking for manufacturers that can provide a 60'x60' aluminum door, can we achieve this using your one-piece hydraulic door?

39

We are in the very preliminary stages of designing and pricing of a private hangar type facility. I would like the specifications on one of your one piece hydraulic doors, including weight and hanging specs. If appropriate at this time a budget figure for such a door, both one made of steel and a price for one made of aluminum. Please feel free to call me or emails me with the information. Thank you for your assistance in this matter. Jason

40

We are commercial glass and glazing contractor and have a contract for work at the University of Connecticut. Part of our scope includes a one piece 20" x 12" hydraulic hangar door with an aluminum frame. I have some design drawings to send. Please let me know where to email information. Thanks, Samuel

41

I'd like to get a quote to supply one 70' X 20' aluminum hydraulic hangar door (material only) , a build your own door kit, to Fort Worth, Texas.

42

Need a price on two 40ft by 10ft doors. Doors will be going on eave side of pole barn. I will require A single piece hydraulic door made from aluminum. I purchased two doors from you about 12-14 yrs ago, and they're still working quite well to this day. Doors will be shipped to Jackson County Airport, Jackson mi.

43

We have a new restaurant location in Vista, California. We need a glass hydraulic door with an aluminum frame for customers to access the patio from the restaurant like the bar example on your home page. Dimensions are roughly 18" x 10" I can get exact dimensions in the next email. What would your lead time be for creation and delivery to California. Thank you.

44

Hello, Our architecture firm is currently working on a single car, residential garage. We are interested in your hydraulic design. We currently want a clear garage door opening of 10' wide and 7' tall. Is that a job you're able to do? If so: -What are the structural requirements? -What are the design options? -Do the doors have an opener? -What is the cost difference between steel and aluminum? (we would most likely want an insulated door option) Thank you for your help! -Jackson

45

The building this door will be on; is a single airplane hangar 80 miles outside Anchorage Alaska. The customer is looking for a aluminum door, but isn't sure if he wants bifold or hydraulic. What do you think?

46

I have a 50ft x 20ft opening that calls for a hydraulic vertical lift door in the construction plans. I need pricing details on both a steel version and a aluminum version and options ASAP. I will also be considering professional installation since no one here has ever installed this type of door. Thanks

47

Hi, I am pricing a project in College Park, MD and need to get pricing on a hydraulic glass and aluminum door

48

LOOKING FOR: ALUMINUM HYDRAULIC  STORAGE CONTAINER DOORS TO FIT THESE OPENINGS 15' 11" WIDE X 7' 3" TALL AND 20' WIDE X 7' 3" TALL. GIVE ME A PRICE ON THESE SAME DOORS USING HYDRAULIC DOORS WITH YOUR NEW ELECTRIC LINEAR ACTUATORS TO KS. 

49

Hello, My name's Dustin and I'm a partner in the process of finishing up buildout of a new bar in highland park Los Angeles, CA and were using another door company who unfortunately didn't work out. We're specifically looking for a hydraulic designer  door as you have, glass and aluminum, but made with a passing door ada width and centered to be used while the door is in its down position. If you could build something like this I'd be very interested. Hope all is well and look forward to hearing from you soon! 

50

quote on single hydraulic aluminum frame door and bifold door 38' wide 12' tall, commercial IN building has 14 side eaves on wall. job site san antonio tx

51

I have a few customers wanting quotes on bi-fold and hydraulic doors, one of which is an aluminum frame hydraulic door. Please contact me soon in Salt Lake City, UT... any method is fine.

52

Need a price on a aluminum bi-fold Schweiss one piece hydro power door. Size is going to be 40' wide x 12' tall. Delivery to MS in two months.

53

I HAVE FOUR OPENINGS IN A NEW CHURCH WORSHIP CENTER IN NV. DOOR OPENINGS ARE 11'-6" W X 10'-1" H. ALUMINUM GLASS SECTIONALS WERE TO BE INSTALLED BUT KNOW THERE IS A ISSUE WITH HEADROOM AND MOUNTING SPRING PADS. LOOKING FOR BALL PARK NUMBER ON 4 HYDRAULIC DESIGNER DOORS WITH TEMPERED GLASS-FRAMEWORK TO BE BRONZE. ARCHITECT PRICED OUT RELINTA DOORS AND THOSE ARE COST PROHIBITED. I APPRECIATE YOUR TIME. I CAN INSTALL THE DOORS. I AM IN NEED OF A NUMBER ASAP. 

54

Need a price on (1) 80' x 25' single swing hydraulic hangar door for airport in Arkansas. Spec calls for a Hydraulic door with aluminum door frame, walk doors and remote door opener.

55

Looking for a bid on 2 12' wide by 8' high... glass/aluminum hydraulic doors doors will "meet" at the right corner post of free standing garage, so that two of the garage walls essentially disappear.

56

I am looking for a quote on a hangar door - a glass bi-fold door sytem. 79'W x 20' H. Can you please email me a general quote and what is the price difference if I go with aluminum instead of steel.

57

Pricing and time line for a Schweiss Bi-Fold 9'wide x 8'high. in Aluminum frame and 1/2" Thermal Glass. Ideal design 4 panels wide x 4 panels high. We would install locally with some guidance from you. Thank You, Grant Jonas

58

We need 2 hydraulic doors for a beach house in Hawaii (both ends of a garage, to make it drive through). The openings are both 11'4" tall. One end is 14' wide, the other end 16' wide. We are interested in maximum headroom, minimum loss to the door thickness, to allow access for trucks and boats through the garage. The ceiling is flat concrete extending more than 15' beyond the door openings, so the door will need to open up tight to the existing ceiling. An external truss would hold the door off the ceiling. An internal truss would stick down and reduce the headroom. Because of the location a few hundred feet from the ocean, we were considering aluminum construction. We would sheet it with aluminum roofing material. Could you please send an estimate of the range of prices?

59

We're looking for more information on a hydraulic type door, aluminum frame with laminated glazing (clear and obscure). We'd also be interested in any details you have to offer for planning purposes (track, attachment, dimensions, etc.) - CAD would be ideal if possible.

60

Need price information on the following: Aluminum steel with pass through man door option 40 X 12 (and perhaps 14 ft) hydraulic

61

would like price and availabilty for the following: 39ft. 6in. wide 11ft. 6in. high aluminum hydraulic door automatic open with remote (ready to install) include all shipping cost

62

We are designing a new school in Chula Vista, CA. In the multipurpose room we have an opening to the exterior that is approximately 45' wide X 7' tall. Can we get an all-glass / aluminum-frame hydraulic door that can maintain 7' clear height when open? What would it cost? Will we need to split it into 2 or 3 sections? Would it be cheaper if we did? What are the waterproofing or seal details at the head, jambs and sill?