523: TENNESSEE DOORS

1

* Insulated panels * Painted wainscot on exterior bottom 36" (all colors TBD) * Double-insulated fixed windows on bottom half. (Your stock 36x48 is fine) Upgrades: * Top override jiggle switches * Photo eye sensors * 3-button constant hold control station * Emergency hand crank * Bottom, top, center, and side weather seals with foam inserts * Strap latches (I think this is standard?) Located in Tennessee.

2

I am a designer at a small architecture firm in Tennessee. We have a residential project where we are wanting to use a bifold glass/polycarbonate garage door that is 8'H x 10'W. I would like it to be a manual door instead of a mechanical door if that is possible. I was wondering if I could get some information regarding one of these doors, such as pricing and the construction method to install. I can also provide an elevation.

3

I have a project that you were specified in going to Tennessee. The opening for the door is 80w x 20 tall. I would grateful for two things. 1. Loads and details that our building would take. 2. Pricing for the door so I can put that with my proposal. If you have an installer near there, I would take that as an alternate. I am assuming we would have to sheet it. In the big picture we could sheet as well, and as far as your answer to the question below, might be something I would likk to do as far as a dealer.

4

Looking for a door dealer and approx price on a 24’ wide by 16’ tall bifold door in Tennessee.

5

Currently building a RV storage building and want a 14'x14' full frame hydraulic lift door. looking for a supplier and a price with shipping to Tennessee.

6

I'm interested in having a a 30ft W x 12ft H Hydraulic door installed on my existing garage in Tennessee. 16ft high sides. 3/12 pitch roof. 14 gauge double legs. 40ft W x 52ft Long. The back is current open. Curious about framing required, is that included as the install or do I need to have garage installer do that pre work?

7

checking on pricing for a 32' wide by 13' tall door for my wood shop in Tennessee. Side posts are wood, header is a Bar joists. What does the door weigh? Wondering if my bar joist will support the weight.

8

I had a quote for. 48x15 stand alone door. I can't find it. Can I get. Quote. I need to order one. Door is going to Tennessee.

9

I am an architect and am working on a aircraft maintenance hanger with one (1) 16' x 50' bifold door and one 20' x 60' bi-fold hangar door going to Tennessee. I would like a recommendation on which door system we should specify and assistance with the specification. We are also working with NUCOR for the pre-engineered metal builiding in which these two doors are to be installed.

10

We are looking for a hydraulic door installer in Tennessee and to discuss hydraulic doors for our residential project

11

I would like a budget quote for a 40 x 14 bifold and hydraulic door for an airplane hangar in Tennessee. Trying to put a cost together to see what the investment would be if I build a hangar at the airport. Building companies are saying they design around the door and the building companies recommended schweiss doors. I would like hydraulic but I'm assuming bifold is probably more cost effective?

12

Looking for a quote on a complete hangar door system , bi-fold or a one piece or both which ever you suggest we should have for a 60'x20' foot opening for our new EAA building . Needing pricing on it and delivered to McMinnville Tennessee. If you would email this written quote I WILL turn it in to our building committee soon as I get it the quote from you guys . I actually own a schweiss doors on my personal hangar and suggested you guys. You may call my cell number above IF needed . Thanks