497: AIRCRAFT HANGAR DOOR

1

I'm looking to get a quote on a aircraft hangar door dimensions: 60x18. Thank you

2

Dear Sir/Madam. We are looking for a schweiss bi-folding door with strap lifts for our aircraft hangar. Dimensions: 11,5m wide and 3,5m high. With one pedestrian door Insulation: 40mm PU or PIR material. Main frame: steel. One pedestrian door. Power: electric. (3x380V 50 HZ) What can you offer us?

3

We are looking for a price range on a schweiss bifold door for an existing aircraft hangar. Our CIP is due on Thursday so we want to make sure we are budgeting the right amount to be able to get a new door next year. I would need a quote or range by 6/12 to be able to enter it into the citys budget for next year.

4

We are getting ready to build a hangar at Delta Blake Field in Delta, Colorado. Looking for a quote for a bifold door. Need 40' wide by 12' high opening.

5

This requested quote is for an airport hangar rehab project we are bidding in Monroe County, Mississippi. I have plans and specs if needed for more accurate pricing.

6

I will be building an airplane hangar this summer and am in the process of selecting a door. The building is limited to 50’x50’, I would like the widest door practicable for that width of building. I’m still working on height, would like to have a 14’ tall door if possible. It appears that you only offer 12’ and 18’ heights, is this correct? After researching, I still don’t know if the bifold or the hydraulic makes most sense for my application. Given similar size of door, which is most cost effective, which is most maintenance free and reliable? In your experience, do you see a particular brand of steel building that you believe to be preferable? What other questions should I be asking? Thanks for your time.

7

I am looking for a 42' x 14' hangar door for a new hangar. I am working with the county for a ground lease and would hope to have the project ready for a door by March or April of 2024. The building itself will be 50' x 50' x 18' with AC Power. It will have a separate man door, so I will not need a man door in door.

8

Need rough opening dimensions for an airplane hangar door for my architect/builder. With the hangar door fully open I want 12 foot clearance open height. Also any other side/vertical structural requirements. Also looking for a price quote for roughly 46x13-14 foot door. Hangar width will be about 50. Thank you

9

Hello, I am looking at building a hanger and I want a door big enough to fit a Cessna 208 on floats. Can you please quote me the cost of such a door and the different options that I might chose? I am looking at construction for this Spring.

10

Looking to build an airplane hanger, we build home and other custom projects. We have a sister company selling ICF and would like to build and ICF hanger in Ontario. We hope to build more after this once once we can show how efficient our ICF hanger will be. I'm interested in a one pice door for maximum insulation during the cold winter. We will be needing a 40'x 13' tall door.

11

I’m building an Airplane Hanger I want a price for a - 50’ by 14’ tall bifold electric door with straps for opening. Can you send me specs on the door requirements so I can get it to the builder for his design of my Hanger, thanks

12

I need a quote on a 72wx20h bifold door. This is going in a new construction aircraft hanger. Shipping to our location. Thank you

13

Building a 60x60 aircraft hangar. Looking for price for 60’x16 or 18 foot bifold door. Thank you in advance, - Ed

14

Looking for a door for a new construction aircraft hangar. Hydraulic single-panel, 42’ wide 10’ high. Building is 50’ x 50’.

15

we Have an Airplane Hanger which requires a full door system. It consists from 10 leafs, 5 at left side and 5 at right side. One leaf size is 16.25m width x 20m height. We are open to receive any proposal, Sliding, Roller, swing.

16

i would like to get a quote on a Bifold aircraft door. 73' wide x 17' i can send you plans.

17

Hello I'm an Estimator for ETRO construction. We have been invited by Pacific Aircraft Services to present a Budget Proposal for the aforementioned project. Who would be the best possible contact from your team so I can tell a little more about the project and share all details. We have a Overhead doors shown on the project but they are lacking a specifications and I was not lucky yet to get anything from the overhead sub-contractors we usually work with. Project location: Pitt Meadows Regional Airport 18799 Airport Way, Pitt Meadows, BC V3Y 2B4 Scope of Work: 4 bay hangar approx. 330' L x 80' W. - 4 full lift Doors each 70'-0" W x 21'-0" H We would need the specifications sheet for this kind of door as it holding the design of the metal hangars. Please let me know and I will send you an invitation with all details throughout our bid platform. Best regards,

18

Looking to finalize research and application for a new aircraft hangar build in Eureka Montana. Seeking a 48' opening, with minimum 14' clear height on a 50' wide hangar that will be stick built.

19

I’m looking for a 40’ x 12’ bi fold door for an airplane hanger. Can you give me an estimate

20

We are trying to build a hanger @ KSAD, in Safford AZ. We need 12' vertical clearance, and desire 40' width in a 50'X50' hanger.

21

I work for a building materials distributor in Oregon. I have a customer interested in two 65w x 19h bifold doors for two airplane hangers. Can you please get back to me with pricing, options, and a dealer in my area if I cannot buy direct? Thank you for your time

22

Hello, I'm designing a build out for a customer's airplane hangar with Schweiss door and was hoping to get a CAD file for it's 50' opening for the architecture model.

23

Have a Canadian distributor ? Looking for a price for a 58X15 door for a Plane Hangar that soon will be in construction in the Greater Montreal, Quebec area. Wood building with a steel frame for the door is projected.

24

I am in need of a custom door for a building we are building. The building is designed with a larger door opening to accommodate aircraft. I have a concept and would need to send some pictures